Add new reader

Discussion in 'RFID Readers - Fixed UHF RFID Readers' started by Paul van der Leij, May 3, 2016.

  1. Paul van der Leij

    Paul van der Leij New Member

    Is it possible to add a reader which is not listed?

    Our customers are using Bluebox readers from iDTRONIC/Solltec, these readers can be put in Spontanious mode (set a destination IP address and port) or Continuous mode (activate reader on impuls, the tag data must be read out of the reader with a command)

    With kind regards

    Paul
     
  2. Joseph Kraebel

    Joseph Kraebel Administrator Staff Member

    Hi Paul,

    Do you know if this reader supports LLRP? If so, select the LLRP option and see if that works.
     
  3. Paul van der Leij

    Paul van der Leij New Member

    Unfortunately no LLRP yet.
     
  4. RedAcoustic

    RedAcoustic New Member

    Hello, i've got an ufh rfid reader that is based on IMPINJ R2000 chip, i tryed to connect it in Impinj type and LLRP but no detecting,by the way the mark of the model is hopeland
     
  5. Joseph Kraebel

    Joseph Kraebel Administrator Staff Member

    Hi,

    Do you know if this reader supports LLRP? I took a look at the website and did not see mention of it.

    Currently, ClearStream supports Zebra, Alien and Feig readers natively and all others requiring the use of LLRP including Impinj.
     

Share This Page