GPIO Lightstack Config

Pinank

New Member
Hi - I need help with this setup. We are trying to get our lightstack to light up whenever the antenna scans a RFID tag and then turn off when its away from the antenna (turn lights on for 3 seconds). How would I set this up with clearstream?

Thanks
 

Howie Heckman III

Moderator
Staff member
ClearStream supports many different manufacturers. This includes RFID readers by Thing Magic (by Jadak). As long as the device in question supports LLRP, and is connected via ethernet, ClearStream will support the GPIO of the device. The setup is generally the same between the different devices except for the wiring.
 
Top