7.2 Build 752 - Initial Release - 6/27/2023
Includes the latest versions of ClearStream On-Board with the installation. Instructions for installing and running ClearStream On-Board for your device type can be found in the Start Menu after installing ClearStream.
New Features:
ClearStream...
7.1 Build 732 - Initial Release - 1/18/2023
New Features:
ClearStream On-Board now supports multiple filters to be defined for tag data.
ClearStream On-Board now supports over-the-air updates (OTA).
ClearStream On-Board will now report when a configuration has been successfully applied.
GPOs...
7.0 Build 724 - Initial Release - 4/12/2022
New Features:
Subscription licensing model, with cloud dashboard providing system status.
Group device type to allow easier configuration of large device counts.
Keyboard Emulation (HID mode) as a new destination.
Send Delay setting for limiting how...
Configuring a Cognex Barcode Reader for use with ClearStream:
https://support.clearstreamrfid.com/hc/en-us/articles/1500005083801-Configuring-a-Cognex-Barcode-Reader-for-use-with-ClearStream
6.0 Build 566 - Initial Release - 8/26/2020
New Features:
ClearStream RFID On-Board - Runs directly on the reader, supports the Zebra FX7500, and FX9600 devices.
Added support for BLE zone locationing.
Added support for IFM readers.
Added the ability to apply a tag mask to scan operations on...
ClearStream supports many different manufacturers. This includes RFID readers by Thing Magic (by Jadak). As long as the device in question supports LLRP, and is connected via ethernet, ClearStream will support the GPIO of the device. The setup is generally the same between the different devices...
Hi,
This looks like it could be a bug in the sizing of that dialog. There should be a Done button at the bottom. I will go ahead and write this up so that we can get a fix for it. In the meantime, you should be able to close that dialog by clicking Alt + F4 on your keyboard.
Let us know if...
Hi Darren,
This is a limitation of the simulator. The antenna setting for name and power are respected, however the Tag Session is not. It has been logged as an issue with the simulator and should be added in a next release of the application. The feature does work with all of the different...
Unfortunately, ClearStream cannot synchronize the clocks on the RFID readers. This may be something that you can do through the web console on the reader. If you use your browser and enter the IP address of your Motorola FX7400/7500 you can login to a web console that allows you to adjust...
Hi Andy,
Yes, you can trigger the GPO (output ports) on the RFID reader when tags are sent to a destination data source. This can include things like buzzers, and lights. You can also control these logically using the Condition field in the GPO configuration. Usually this is a '0' if the tag...
Hi Justin,
To answer your questions:
Any EPC Gen 2 RFID reader can read any EPC Gen 2 tag. All you should have to do is take a look at the tag specs, and if it is an EPC Gen 2 tag than you should be fine.
There are many different RFID readers available. The most common we see are readers from...
I don't know of too many cases where a tag can't be read, unless it has been killed or is defective. They come from the manufacturer pre-encoded with an ID. So, if you had a list of valid tags and you scan the tag and it is not found this would be the indication the the write had failed.
The only way of doing this would be to compare the tag to a database of valid tag values. This way when the tag is read, it will attempt to find it in the database of valid tags, and if it is not found you can fire an event to power up the GPOs.
Hi Tom,
There shouldn't be any time frame where GPOs will fail.
By restarting the reader does this always fix the issue? Also, could you send us your event log? You can find this by opening ClearStream, click View->Event Log, and then click the Open Log File button. Please send us the contents...
Hello,
What you are describing sounds correct. Basically the last antenna to pick up the RFID tag will update that item in the database with the current status (in, or out). There really is no way of fooling the reader with different methods of moving in, or out of the portal. However, you...